5HF 4-R

Type 5HF / 5HFP Quick-acting Fuse Series (High -Breaking Capacity) 5HF/5HFP Series, 5x20mm Ceramic Tube Quick-acting Fuse RoHS 2 Compliant Description 5x20mm quick-acting, high breaking capacity, ceramic body cartridge fuse designed, approved and complied with IEC 60127-2,standard sheet 1. Features - High breaking capacity (250V ac @1500A) - Meet IEC standard 60127-2, sheet 1 - Wide operating temperature range - Bulk and Tape & Reel packing available - RoHS 2 compliant - Halogen Free - Lead Free Applications Provide individual protection for components or internal circuits. - Power supplies - Battery charger - Monitor LEAD FREE = - Adapter HALOGEN FREE = Physical Specifications Body : Glass Materials Cap : Nickel Plated Brass Caps Leads : Matte Tin Plated Copper On Fuse : “bel”, ”F”, ”Current Rating”, “H”,”250V”, "Appropriate Safety Logos", ”  ”（ RoHS 2 compliant） Marking On Label : "bel", "5HF”or”5HFP", "Current Rating", "Voltage Rating", "Interrupting Rating", "Appropriate Safety Logos" and " ", " "(China RoHS compliant). Electrical Characteristics(IEC-127-2 STANDARD SHEET 1 ) Safety Agency Approvals Rated Current 1.5 In 2.1 In 2.75 In 4 In 10 In MIN MAX MIN MAX MIN MAX MAX 100mA to 3.15A 1 30 10 2 3 300 20 4A to 6.3A 1 30 10 3 3 300 20 8A to 12A 1 30 40 20 10 1000 30 hr. min. ms sec ms ms ms In clause 9.2, the test voltage for 5HFP ratings from 1A to 6.3A is 63VDC. Safety Agency Safety Agency Certificate Voltage Rating (V) Ampere Range / Volt @ I.R. ability* 1808556 1A-10A/250V AC@1500A 40000506 1A-6.3A / 250V AC@1500A E20624 100mA-10A LR39772 100mA-10A/250V AC@1500A /250V AC JET1037-31003-1008 JET1037-31003-1009 2002010207021529 1A-5A/250V AC@1500A 100mA-10A/250V AC@1500A *I.R.= Interrupting Rating = Short Circuit Rating(Amps) Specifications subject to change without notice belfuse.com/circuit-protection Type 5HF / 5HFP 2/4 Environmental Specifications Shock Resistance MIL-STD-202G, Method 213B, Test Condition 1 (100 G's peak for 6 milliseconds; Sawtooth waveform) Vibration Resistance MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion). Salt Spray Resistance MIL-STD-202G, Method 101E, Test Condition B (48 hrs). Insulation Resistance MIL-STD-202G, Method 302, Test Condition B (After Opening) 100,000 ohms minimum. Solderability MIL-STD-202G, Method 208H Resistance to solder Heat MIL-STD-202G, Method 210F, Test Condition B. (260+/-5℃, 10+/-1 sec) Thermal Shock MIL-STD-202G, Method 107G, Test Condition B (-65℃ to +125℃). Operating Temperature -55℃ to +125℃ Terminal Strength IEC-68-2-21 Electrical Specifications Typical Cold Volt-drop Resistance @100%In (ohms) (Volt) max. Voltage and Interrupting Ratings Maximum Melting I²T Melting I²T Power